产品简介 Product introduction
iHeir防霉包吸潮能力是自身重量的3倍，吸潮同时释放抗菌因子杀菌！
iHeir Anti-mold Dryer moisture absorption capacity is 3 times their own weight,Moisture absorption and release antibacterial factor destroy the surrounding mold!
iHeir Anti-mold Dryer防霉包原料是采自天然的矿物，是一种化学性能稳定的矽酸铝。在25℃，相对湿度为80%的条件下，吸附水蒸汽的最大容量可超过自身重量的300%，并且吸潮的同时释放抗菌因子杀菌，当湿度越大，释放抗菌因子越浓。iHeir Anti-mold Dryer防霉包重金属含量低于欧盟及美国法规限值,本身不含酸性，用后丢弃不会对泥土，和水及空气等环境造成污染。
iHeir Anti-mold Dryer is a stable cross linked sodium polypropylene acid，It absorbs more than 100% of steam under 25℃ and relative moisture 80%，The absorbency is more than 250 g. The heavy metal content is below then EURO and American Standard. Therefore the chemical itself is a environmental friendly product and will not cause any pollution in our soil; water and air.
产品规格参数 Product specifications
| 品名 Product name | 型号 Model | 规格 Specifications | 尺寸Size L x W | 包装 Packaging | 重量 Weight |
| 防霉包 Anti-mold Dryer | F-1 | 1g | 410mm x 260mm | 1000包/袋，15袋/箱；1000 package/bag, 15 bags/box | 15Kg |
| 防霉包 Anti-mold Dryer | F-2 | 2g | 460mm x 340mm | 1000包/袋，10袋/箱；1000 package/bag, 10 bags/box | 20Kg |
| 防霉包 Anti-mold Dryer | F-3 | 3g | 520mm x 460mm | 1000包/袋，5袋/箱；1000 package/bag, 5 bags/box | 20Kg |
| 防霉包 Anti-mold Dryer | F-5 | 5g | 520mm x 460mm | 1000包/袋，5袋/箱；1000 package/bag, 5 bags/box | 25Kg |
| 防霉包 Anti-mold Dryer | F-10 | 10g | 800mm x 600mm | 500包/袋，5袋/箱；500 package/bag, 5 bags/box | 25Kg |
产品特性 Product features
-
以美国环保微晶材料为吸湿载体
-
吸潮能力强，饱和稀释率可达自身重量的300%
-
吸潮的同时，释放抗菌因子杀菌
-
主动吸附产品异味，例如皮革味道、胶水味道以及其它异味
-
采用不易破损的网纹纸包装，不易破损、不易漏灰
-
埋在土壤中三个月可自然降解，可种花种草
-
可根据客户需求定制不同规格及LOGO
-
American environment-friendly micro-crystal raw materials
-
Strong moisture absorption capacity.The saturated moisture absorption rate can reach 300% of itsown weight
-
Absorption of moisture, release antibacterial factor of sterilization
-
Initiatively absorb the nitrides,sulfides,particles in the air and peculiar smell left by product smell
-
Use is not easy to damage the checkered paper, not easy damaged, not easy to leak
-
Buried in the three months can be natural degradation in soil, grass and flowers
-
Different specification and LOGO can be made according to the needs of customers
产品应用 Product Application
iHeir Power Dryer防霉包不含任何添加剂、腐蚀性物质和氯化物，纯天然矿物加工而成。其pH值显中性,对任何金属无任何腐蚀性。能广泛用于纺织、五金、鞋子、服装、箱包、电子、音响、电器、机械、药品、食品等产品的防潮、防霉。
Widely used in the storage, transportation, electric, machinery, medicine, expensive garment, shoe, hat, case, bag, and etc.
产品包装 Product packaging
1、除了复合纸、热封滤纸，无纺布和杜邦纸，也可根据客户需求采用其他包材。
1、We can use other packaging material upon on request.
2、包材表面印刷文字、图案可根据客户要求定制。
2、We can customer print your logo and warning sign.
3、我们也可根据客户要求定制吸湿率达自身重量的100%以上的大包装货柜干燥剂。
3、We can use different packing size upon on request.
iHeir防霉包与硅胶干燥剂吸水测试对比
iHeir anti-mold Dryer compared with silica gel desiccant water absorption test
iHeir防霉干燥剂
iHeir anti-mold desiccant
吸水前重量为2.21g
Before the suction weight is 2.21g
吸水过程1-3分钟
Water absorption process 1-3 minutes
吸水后重量
After the water weight
Power Dryer倒入杯中还可以继续吸水
iHeir anti-mold desiccant pour also can continue to water absorption
硅胶干燥剂
Silica desiccant
吸水前重量为2.07g
Before the suction weight is 2.07g
吸水过程1-3分钟
Water absorption process 1-3 minutes
吸水后重量
After the water weight
Power dryer锁水后
After water iHeir anti-mold desiccant lock
馒头或皮革防霉试验
Rapid comparative experiment of mildew prevention
防霉包
Anti-mold Dryer
VS
实验步骤：
将馒头或皮革一分为二，分别放入两个塑料罐子中，其中一个罐子放一包iHeir防霉包，另外一个罐子放普通干燥剂或其它您认为效果好的防霉产品，同时将两个罐子盖子盖上，放置一个星期至一个月就可看到防霉效果。
Experimental procedure：
Divide the steamed bun or leather into two cans.put the iHeir Anti-mold Dryer into one can,and put the common silica gel desiccant into another can.Waiting for a week to month,you can see the anti mildew effect.
普通干燥剂
Common desiccant
储存与运输 Storage and transportation
1、运输过程中注意小心轻放，避免内外包装的机械擦伤。
1、Prevent unnecessary rub against sharp material.
2、运输和仓储的环境保持阴凉干燥。密封保存保质期一年。
2、Keep storage environment cool and dry.Seal save a year shelf life.
3、内包装拆包使用后，剩余部分产品必须放置于密闭容器中保存。
3、Keep in air tight container after opening the package.
